徐工刮板大鏈條方塊活節#708060

刮板鏈條常見的故障

1.料條太松，與瀝青混合料相刮碰；

2.瀝青混合料中混入鋼筋等雜物，將鏈條卡死，使刮板不能轉動；

3.攤鋪機底板連接螺栓松動或底板開裂翹曲，將刮板輸料器卡死。

4.右側刮板鏈條斷裂。

5.刮板鏈條前后兩端軸承損壞。一般是因為軸承外面的油封和塵套損壞，瀝青混合料進入后，引起刮板卡死或阻力過大，致使軸承損壞傳動鏈條材料為優質的合金鋼材。

 

 

免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.

 

 

 

 

企業介紹

公司供應攤鋪機配件，壓路機配件，銑刨機配件，攤鋪機刮板驅動軸，刮板驅動軸總成，找平儀，找平儀支架以及液壓泵和配件。還供應攤鋪機易損件，攤鋪機平衡梁，攪龍軸，踏板，輸料底板，葉片，熨平板，減速機，鏈軌，履帶板，支重輪，刮板大鏈條，輸料鏈條等。

 

聯系人：梁經理

聯系方式：13645201509

（微信同號）

QQ：2870202745

 

 

 

QQ郵箱：2870202745@qq.com

 

 

網易郵箱：LS13645201509@163.com

 

 

Common faults of scraper chains

 

 

1. The material strip is too loose and scrapes against the asphalt mixture;

 

 

2. When steel bars and other debris are mixed into the asphalt mixture, the chain is stuck and the scraper cannot rotate;

 

 

3. If the connecting bolts of the bottom plate of the paver are loose or the bottom plate is cracked or warped, the scraper feeder will be stuck.

 

 

4. The right scraper chain is broken.

 

 

5. The bearings at both ends of the scraper chain are damaged. Usually, it is because the oil seal and dust sleeve outside the bearing are damaged, and the asphalt mixture enters, causing the scraper to get stuck or have excessive resistance, resulting in bearing damage. The transmission chain material is high-quality alloy steel.

 

 

Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

 

 

Enterprise Introduction

 

 

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, balance beams, agitator shafts, pedals, feeding soleplates, blades, ironing plates, reducers, chain tracks, track shoes, supporting wheels, scraper chains, feeding chains, etc.

 

 

Contact person: Manager Liang

 

 

Contact information: 13645201509

 

 

(Same WeChat account)

 

 

QQ: 2870202745

 

 

QQ email: 2870202745@qq.com

 

 

 

 

 

NetEase email: LS13645201509@163.com